Roman Blind Fitting Instructions

Step 1

Outside Recess
If fitting the blind outside the window, measurements C will need to be the same. To work out C, simply subtract measurement B from A and divide the answer by 2. Follow instructions for Face Fixing.

Inside Recess
Decide whether to Face Fix or Top Fix. Face Fix to fit the bracket to the window frame. Top Fix to the lintel if the window frame is uPVC, or if there are any obstructions, e.g. window handles.

Step 2

Place blind in fitting position. Space the brackets (B) evenly.

Step 3

Top Fixing
Measure the distance that any handles protrude from the frame, A. Mark this measurement on the lintel and use it to positon the back of the bracket. Mark the position of holes B and screw bracket to lintel using screws and rawl plugs supplied.

Face Fixing
Position bracket with swing arm facing towards you, and mark holes B. Screw bracket in place. Use rawl plugs if fitting to the wall.

Step 4

Push swing arm anti-clockwise as far as it will go. Now clip the blind over the bracket, first easing the front lip of the headrail A into place, before the back corner clicks in. Push swing arm clockwise until it locks into place, firmly holding the blind headrail.